Acrylonitrile fun awọn resini ABS,
Acrylonitrile fun Aacrylonitrile Butadiene Styrene, Acrylonitrile funABS,
Awọn polima Acrylonitrile–butadiene–styrene (ABS) jẹ elastomer ti a tuka bi apakan apakan particulate tirun ninu matrix thermoplastic ti styrene ati acrylonitrile copolymer (SAN).Iwaju SAN tirun sori paati elastomeric, nigbagbogbo polybutadiene tabi copolymer butadiene, ṣe afiwe roba pẹlu paati SAN.Awọn anfani ohun-ini ti a pese nipasẹ alọmọ terpolymer pẹlu lile to dara julọ, iduroṣinṣin iwọn to dara, ilana to dara, ati resistance kemikali.Awọn eto ti wa ni structurally eka.Eleyi gba akude versatility ni telo ti-ini lati pade kan pato ọja awọn ibeere.Nitoribẹẹ, iwadii ati idagbasoke ni awọn eto ABS n ṣiṣẹ.Awọn onipò lọpọlọpọ ti ABS wa, pẹlu awọn alloys tuntun ati awọn onipò pataki fun ooru giga, imuna-ina, tabi awọn ibeere ọja itusilẹ aimi.Idaduro kẹmika ti o dara ni idapo pẹlu gbigba omi kekere ti o kere ju
Orukọ ọja | Acrylonitrile |
Oruko miiran | 2-Propenenitrile, Acrylonitrile |
Ilana molikula | C3H3N |
CAS No | 107-13-1 |
EINECS No | 203-466-5 |
UN KO | 1093 |
Hs koodu | 292610000 |
Ìwúwo molikula | 53,1 g/mol |
iwuwo | 0.81 g/cm3 ni 25 ℃ |
Oju omi farabale | 77.3 ℃ |
Ojuami yo | -82 ℃ |
Ipa oru | 100 torr ni 23 ℃ |
Solubility Solubility ni isopropanol, ethanol, ether,acetone, ati benzene Iyipada ifosiwewe. | 1 ppm = 2.17 mg/m3 ni 25 ℃ |
Mimo | 99.5% |
Ifarahan | Awọ sihin omi |
Ohun elo | Ti a lo ninu iṣelọpọ ti polyacrylonitrile, roba nitrile, awọn awọ, awọn resini sintetiki |
Idanwo | Nkan | Abajade Standard |
Ifarahan | Awọ sihin omi | |
Awọ APHA PT-Co :≤ | 5 | 5 |
acidity (acetic acid) mg/kg ≤ | 20 | 5 |
PH(5% ojutu olomi) | 6.0-8.0 | 6.8 |
Iye titration (5% ojutu olomi) ≤ | 2 | 0.1 |
Omi | 0.2-0.45 | 0.37 |
Iye Aldehydes (acetaldehyde) (mg/kg) ≤ | 30 | 1 |
Iye Cyanogens (HCN) ≤ | 5 | 2 |
Peroxide (hydrogen peroxide) (mg/kg) ≤ | 0.2 | 0.16 |
Fe (mg/kg) ≤ | 0.1 | 0.02 |
Cu (mg/kg) ≤ | 0.1 | 0.01 |
Acrolein (mg/kg) ≤ | 10 | 2 |
Acetone ≤ | 80 | 8 |
Acetonitrile (mg/kg) ≤ | 150 | 5 |
Propionitrile (mg/kg) ≤ | 100 | 2 |
Oxazole (mg/kg) ≤ | 200 | 7 |
Methylacrylonitrile (mg/kg) ≤ | 300 | 62 |
Akoonu Acrylonitrile (mg/kg) ≥ | 99.5 | 99.7 |
Ibiti o farabale (ni 0.10133MPa) ℃ | 74.5-79.0 | 75.8-77.1 |
Polymerization inhibitor (mg/kg) | 35-45 | 38 |
Ipari | Awọn abajade wa ni ibamu pẹlu iduro ile-iṣẹ |
Acrylonitrile jẹ iṣelọpọ ni iṣowo nipasẹ propylene ammoxidation, ninu eyiti propylene, amonia, ati afẹfẹ ti ṣe idahun nipasẹ ayase ni ibusun olomi.Acrylonitrile ti lo nipataki bi àjọ-monomer ni iṣelọpọ ti akiriliki ati awọn okun modacrylic.Awọn lilo pẹlu iṣelọpọ awọn pilasitik, awọn aṣọ ibora, awọn elastomer nitrile, awọn resini idena, ati awọn adhesives.O tun jẹ agbedemeji kemikali ninu iṣelọpọ ti ọpọlọpọ awọn antioxidants, awọn oogun elegbogi, awọn awọ, ati iṣẹ dada.
1. Acrylonitrile ṣe ti polyacrylonitrile fiber, eyun okun akiriliki.
2. Acrylonitrile ati butadiene le jẹ copolymerized lati ṣe agbejade roba nitrile.
3. Acrylonitrile, butadiene, styrene copolymerized lati mura ABS resini.
4. Acrylonitrile hydrolysis le gbe acrylamide, acrylic acid ati awọn esters rẹ.